From: Alexandre Belloni Date: Fri, 20 Sep 2019 15:39:06 +0000 (+0200) Subject: clk: at91: avoid sleeping early X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=658fd65cf0b0d511de1718e48d9a28844c385ae0;p=linux.git clk: at91: avoid sleeping early It is not allowed to sleep to early in the boot process and this may lead to kernel issues if the bootloader didn't prepare the slow clock and main clock. This results in the following error and dump stack on the AriettaG25: bad: scheduling from the idle thread! Ensure it is possible to sleep, else simply have a delay. Reported-by: Uwe Kleine-König Signed-off-by: Alexandre Belloni Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver") Tested-by: Uwe Kleine-König Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c index 87083b3a2769d..37c22667e8319 100644 --- a/drivers/clk/at91/clk-main.c +++ b/drivers/clk/at91/clk-main.c @@ -297,7 +297,10 @@ static int clk_main_probe_frequency(struct regmap *regmap) regmap_read(regmap, AT91_CKGR_MCFR, &mcfr); if (mcfr & AT91_PMC_MAINRDY) return 0; - usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT); + if (system_state < SYSTEM_RUNNING) + udelay(MAINF_LOOP_MIN_WAIT); + else + usleep_range(MAINF_LOOP_MIN_WAIT, MAINF_LOOP_MAX_WAIT); } while (time_before(prep_time, timeout)); return -ETIMEDOUT; diff --git a/drivers/clk/at91/sckc.c b/drivers/clk/at91/sckc.c index 9bfe9a28294a7..fac0ca56d42d9 100644 --- a/drivers/clk/at91/sckc.c +++ b/drivers/clk/at91/sckc.c @@ -76,7 +76,10 @@ static int clk_slow_osc_prepare(struct clk_hw *hw) writel(tmp | osc->bits->cr_osc32en, sckcr); - usleep_range(osc->startup_usec, osc->startup_usec + 1); + if (system_state < SYSTEM_RUNNING) + udelay(osc->startup_usec); + else + usleep_range(osc->startup_usec, osc->startup_usec + 1); return 0; } @@ -187,7 +190,10 @@ static int clk_slow_rc_osc_prepare(struct clk_hw *hw) writel(readl(sckcr) | osc->bits->cr_rcen, sckcr); - usleep_range(osc->startup_usec, osc->startup_usec + 1); + if (system_state < SYSTEM_RUNNING) + udelay(osc->startup_usec); + else + usleep_range(osc->startup_usec, osc->startup_usec + 1); return 0; } @@ -288,7 +294,10 @@ static int clk_sam9x5_slow_set_parent(struct clk_hw *hw, u8 index) writel(tmp, sckcr); - usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1); + if (system_state < SYSTEM_RUNNING) + udelay(SLOWCK_SW_TIME_USEC); + else + usleep_range(SLOWCK_SW_TIME_USEC, SLOWCK_SW_TIME_USEC + 1); return 0; } @@ -533,7 +542,10 @@ static int clk_sama5d4_slow_osc_prepare(struct clk_hw *hw) return 0; } - usleep_range(osc->startup_usec, osc->startup_usec + 1); + if (system_state < SYSTEM_RUNNING) + udelay(osc->startup_usec); + else + usleep_range(osc->startup_usec, osc->startup_usec + 1); osc->prepared = true; return 0;