From: Niklas Söderlund Date: Thu, 29 Nov 2018 02:01:44 +0000 (-0500) Subject: media: dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=6af61a0bc43201425afa6052d24f2a67648f69d2;p=linux.git media: dt-bindings: adv748x: make data-lanes property mandatory for CSI-2 endpoints The CSI-2 transmitters can use a different number of lanes to transmit data. Make the data-lanes mandatory for the endpoints that describe the transmitters as no good default can be set to fallback on. Signed-off-by: Niklas Söderlund Reviewed-by: Laurent Pinchart Reviewed-by: Rob Herring Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/devicetree/bindings/media/i2c/adv748x.txt b/Documentation/devicetree/bindings/media/i2c/adv748x.txt index 5dddc95f9cc46..4f91686e54a6b 100644 --- a/Documentation/devicetree/bindings/media/i2c/adv748x.txt +++ b/Documentation/devicetree/bindings/media/i2c/adv748x.txt @@ -48,7 +48,16 @@ are numbered as follows. TXA source 10 TXB source 11 -The digital output port nodes must contain at least one endpoint. +The digital output port nodes, when present, shall contain at least one +endpoint. Each of those endpoints shall contain the data-lanes property as +described in video-interfaces.txt. + +Required source endpoint properties: + - data-lanes: an array of physical data lane indexes + The accepted value(s) for this property depends on which of the two + sources are described. For TXA 1, 2 or 4 data lanes can be described + while for TXB only 1 data lane is valid. See video-interfaces.txt + for detailed description. Ports are optional if they are not connected to anything at the hardware level.