From: Beniamin Bia Date: Wed, 21 Aug 2019 14:16:56 +0000 (+0300) Subject: dt-bindings: iio: adc: Add AD7606B ADC documentation X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=6b4d6822eef58dc17d35ece72369045247843990;p=linux.git dt-bindings: iio: adc: Add AD7606B ADC documentation Documentation for AD7606B Analog to Digital Converter and software mode was added. Signed-off-by: Beniamin Bia Reviewed-by: Rob Herring Signed-off-by: Jonathan Cameron --- diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 3ecdfa780ae38..cc544fdc38bea 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -13,6 +13,7 @@ maintainers: description: | Analog Devices AD7606 Simultaneous Sampling ADC https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7606B.pdf https://www.analog.com/media/en/technical-documentation/data-sheets/AD7616.pdf properties: @@ -22,6 +23,7 @@ properties: - adi,ad7606-8 - adi,ad7606-6 - adi,ad7606-4 + - adi,ad7606b - adi,ad7616 reg: @@ -87,7 +89,7 @@ properties: adi,sw-mode: description: - Software mode of operation, so far available only for ad7616. + Software mode of operation, so far available only for ad7616 and ad7606b. It is enabled when all three oversampling mode pins are connected to high level. The device is configured by the corresponding registers. If the adi,oversampling-ratio-gpios property is defined, then the driver will set the