From: Adam Ford <aford173@gmail.com>
Date: Tue, 2 Apr 2019 19:25:46 +0000 (-0500)
Subject: ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=6fd6d6f6a2f06cb921a0185072854c3d35d86ff1;p=linux.git

ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend

The LCD power sequencer is very finicky.  The backlight cannot
be driven until after the sequencer is done.  Until now, the
regulators were marked with 'regulator-always-on' to make sure
it came up before the backlight.  This patch allows the LCD
regulators to power down and prevent the backlight from being
used again until the sequencer is ready.  This reduces
standby power consumption by ~100mW.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index 45eb0b7f75f83..d96ae54be3381 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -21,6 +21,8 @@
 
 	panel-lvds0 {
 		compatible = "okaya,rs800480t-7x0gp";
+		power-supply = <&reg_lcd_reset>;
+		backlight = <&backlight>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -38,7 +40,6 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-always-on;
 		vin-supply = <&reg_3v3>;
 		startup-delay-us = <500000>;
 	};
@@ -52,7 +53,6 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-always-on;
 		vin-supply = <&reg_lcd>;
 	};
 };