From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: Sat, 20 Jun 2020 16:36:52 +0000 (+0200)
Subject: ARM: dts: meson: add the SDHC MMC controller
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=73106f75bf9498ff5d50f1052ad3cf03730d806d;p=linux.git

ARM: dts: meson: add the SDHC MMC controller

Meson6, Meson8, Meson8b and Meson8m2 are using a similar SDHC controller
IP which typically connects to an eMMC chip (because unlike the SDIO
controller the SDHC controller has an 8-bit bus interface).

On Meson8, Meson8b and Meson8m2 the clock inputs are all the same.
However, Meson8m2 seems to have an improved version of the SHDC
controller IP which doesn't require the driver to wait manually for a
flush of a DMA transfer. Thus every SoC has it's own compatible string
so if more difference are discovered they can be implemented.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200620163654.37207-2-martin.blumenstingl@googlemail.com
---

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index ae89deaa8c9c4..4640579895724 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -140,6 +140,13 @@
 				status = "disabled";
 			};
 
+			sdhc: mmc@8e00 {
+				compatible = "amlogic,meson-mx-sdhc";
+				reg = <0x8e00 0x42>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>;
+				status = "disabled";
+			};
+
 			gpio_intc: interrupt-controller@9880 {
 				compatible = "amlogic,meson-gpio-intc";
 				reg = <0x9880 0x10>;
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index d09d19d4423a5..277c0bb104534 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -386,6 +386,15 @@
 			};
 		};
 
+		sdxc_b_pins: sdxc-b {
+			mux {
+				groups = "sdxc_d0_b", "sdxc_d13_b",
+					 "sdxc_clk_b", "sdxc_cmd_b";
+				function = "sdxc_b";
+				bias-pull-up;
+			};
+		};
+
 		spi_nor_pins: nor {
 			mux {
 				groups = "nor_d", "nor_q", "nor_c", "nor_cs";
@@ -560,6 +569,16 @@
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2069c57343e56..2401cdf5f7511 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -363,6 +363,16 @@
 			};
 		};
 
+		sdxc_c_pins: sdxc-c {
+			mux {
+				groups = "sdxc_d0_c", "sdxc_d13_c",
+					 "sdxc_d47_c", "sdxc_clk_c",
+					 "sdxc_cmd_c";
+				function = "sdxc_c";
+				bias-pull-up;
+			};
+		};
+
 		pwm_c1_pins: pwm-c1 {
 			mux {
 				groups = "pwm_c1";
@@ -554,6 +564,16 @@
 	nvmem-cell-names = "temperature_calib";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8-sdhc", "amlogic,meson-mx-sdhc";
+	clocks = <&xtal>,
+		 <&clkc CLKID_FCLK_DIV4>,
+		 <&clkc CLKID_FCLK_DIV3>,
+		 <&clkc CLKID_FCLK_DIV5>,
+		 <&clkc CLKID_SDHC>;
+	clock-names = "clkin0", "clkin1", "clkin2", "clkin3", "pclk";
+};
+
 &sdio {
 	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
 	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index c7ddbb2103667..6725dd9fd825c 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -84,6 +84,10 @@
 	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
 };
 
+&sdhc {
+	compatible = "amlogic,meson8m2-sdhc", "amlogic,meson-mx-sdhc";
+};
+
 &usb0_phy {
 	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
 };