From: Geert Uytterhoeven <geert+renesas@glider.be>
Date: Thu, 9 Sep 2021 09:03:12 +0000 (+0200)
Subject: arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=732e8ee0351c59ded4d88106437a7ad1cff4cb83;p=linux.git

arm64: dts: renesas: rcar-gen3: Add missing Ethernet PHY resets

Describe all Ethernet PHY reset GPIOs on R-Car Gen3 boards, to avoid
relying solely on boot loaders to bring PHYs out of reset.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/3e6fd765850e8ef0980d8e98bc5f2126538d626f.1631177442.git.geert+renesas@glider.be
---

diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index 5f5a0bb2da86c..eb0327c0df48f 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -249,6 +249,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio5 18 GPIO_ACTIVE_LOW>;
 		/*
 		 * TX clock internal delay mode is required for reliable
 		 * 1Gbps communication using the KSZ9031RNX phy present on
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index c7451973f8a5b..b579d3189a93e 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas Eagle board based on r8a77970";
@@ -98,6 +99,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 2f77ec4ed7e16..39f3e6cbba3d5 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77970.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas V3M Starter Kit board";
@@ -113,6 +114,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index 4cb5bfa6932d5..3d6d10c82f48d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas Condor board based on r8a77980";
@@ -138,6 +139,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
index ca69d1b1d67af..1d09d8867651a 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
@@ -8,6 +8,7 @@
 
 /dts-v1/;
 #include "r8a77980.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Renesas V3H Starter Kit board";
@@ -118,6 +119,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio4>;
 		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
 	};
 };