From: Johan Jonker Date: Wed, 20 May 2020 07:33:27 +0000 (+0200) Subject: dt-bindings: input: touchscreen: edt-ft5x06: change reg property X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=73b1e2170a9da9a12166ec15ac4bb20f94e870d4;p=linux.git dt-bindings: input: touchscreen: edt-ft5x06: change reg property A test with the command below gives this error: arch/arm/boot/dts/rk3188-bqedison2qc.dt.yaml: touchscreen@3e: reg:0:0: 56 was expected The touchscreen chip on 'rk3188-bqedison2qc' and other BQ models was shipped with different addresses then the binding currently allows. Change the reg property that any address will pass. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/touchscreen/ edt-ft5x06.yaml Signed-off-by: Johan Jonker Acked-by: Heiko Stuebner Signed-off-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 2aac76c25c113..024b262a2ef79 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -42,7 +42,7 @@ properties: - focaltech,ft6236 reg: - const: 0x38 + maxItems: 1 interrupts: maxItems: 1