From: Dmitry Osipenko Date: Sat, 11 Dec 2021 21:14:02 +0000 (+0300) Subject: ARM: tegra: Add CPU thermal zones to Nyan device-tree X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7525c2a354e083a33f8775f810edd544f11ec108;p=linux.git ARM: tegra: Add CPU thermal zones to Nyan device-tree CPU of Nyan Chromebooks is overheating badly because apparently hardware soctherm controller doesn't work well. Add CPU thermal zones to enable software thermal control over CPU and fix the overheat trouble. Tested-by: Thomas Graichen # T124 Nyan Big Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding --- diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index f693daad68d85..a93cfb492ba10 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 #include +#include #include "tegra124.dtsi" / { @@ -87,7 +88,7 @@ interrupts = ; }; - temperature-sensor@4c { + tmp451: temperature-sensor@4c { compatible = "ti,tmp451"; reg = <0x4c>; interrupt-parent = <&gpio>; @@ -789,6 +790,52 @@ gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; priority = <200>; }; + + cpus { + cpu0: cpu@0 { + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + #cooling-cells = <2>; + }; + + cpu2: cpu@2 { + #cooling-cells = <2>; + }; + + cpu3: cpu@3 { + #cooling-cells = <2>; + }; + }; + + thermal-zones { + cpu-skin-thermal { + polling-delay-passive = <1000>; /* milliseconds */ + polling-delay = <5000>; /* milliseconds */ + + thermal-sensors = <&tmp451 0>; + + trips { + cpu_passive_trip: cpu-alert0 { + /* throttle at 70C until temperature drops to 69.8C */ + temperature = <70000>; + hysteresis = <200>; + type = "passive"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_passive_trip>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; }; #include "cros-ec-keyboard.dtsi"