From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Tue, 19 Feb 2019 16:46:32 +0000 (-0800)
Subject: ARM: dts: am335x-evmsk: Fix PHY mode for ethernet
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=759c962d3c9bb1a60e3b4b780daa66ee6d4be13a;p=linux.git

ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 172c0224e7f6c..b128998097ce7 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };