From: Michal Vokáč <michal.vokac@ysoft.com>
Date: Thu, 3 Oct 2019 06:12:56 +0000 (+0200)
Subject: ARM: dts: imx6dl-yapp4: Enable the MPR121 touchkey controller on Hydra
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=764b5b5e704e1d991ad168a5e0c47d1dfc0018b1;p=linux.git

ARM: dts: imx6dl-yapp4: Enable the MPR121 touchkey controller on Hydra

Add the touch keyboard present on Hydra board. The controller
is connected only using I2C lines. The interrupt line is not
available hence we use the polling mode.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800fec6379..6507bfc0141a3 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -330,6 +331,18 @@
 		vcc-supply = <&sw2_reg>;
 		status = "disabled";
 	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
index f979270647501..84c275bfdd381 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
+++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
@@ -45,6 +45,10 @@
 	status = "okay";
 };
 
+&touchkeys {
+	status = "okay";
+};
+
 &usdhc3 {
 	status = "okay";
 };