From: Uwe Kleine-König Date: Fri, 22 Sep 2023 19:28:34 +0000 (+0200) Subject: leds: pwm: Don't disable the PWM when the LED should be off X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=76fe464c8e64e71b2e4af11edeef0e5d85eeb6aa;p=linux.git leds: pwm: Don't disable the PWM when the LED should be off Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false) gives no guarantees what the PWM output does. It might freeze where it currently is, or go in a High-Z state or drive the active or inactive state, it might even continue to toggle. To ensure that the LED gets really disabled, don't disable the PWM even when .duty_cycle is zero. This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is one of those that freezes its output on disable, so if you disable an LED that is full on, it stays on. If you disable a LED with half brightness it goes off in 50% of the cases and full on in the other 50%. Fixes: 41c42ff5dbe2 ("leds: simple driver for pwm driven LEDs") Reported-by: Rogan Dawes Reported-by: Fabio Estevam Signed-off-by: Uwe Kleine-König Reviewed-by: Fabio Estevam Link: https://lore.kernel.org/r/20230922192834.1695727-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones --- diff --git a/drivers/leds/leds-pwm.c b/drivers/leds/leds-pwm.c index 419b710984ab6..2b3bf1353b707 100644 --- a/drivers/leds/leds-pwm.c +++ b/drivers/leds/leds-pwm.c @@ -53,7 +53,7 @@ static int led_pwm_set(struct led_classdev *led_cdev, duty = led_dat->pwmstate.period - duty; led_dat->pwmstate.duty_cycle = duty; - led_dat->pwmstate.enabled = duty > 0; + led_dat->pwmstate.enabled = true; return pwm_apply_state(led_dat->pwm, &led_dat->pwmstate); }