From: Stephan Gerhold Date: Wed, 2 Jun 2021 04:26:22 +0000 (-0700) Subject: dt-bindings: input: touchscreen: edt-ft5x06: add iovcc-supply X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=77191c8d6ccf2ef6d09a1a931419bd0595d046a1;p=linux.git dt-bindings: input: touchscreen: edt-ft5x06: add iovcc-supply At the moment, the edt-ft5x06 driver can control a single regulator ("vcc"). However, some FocalTech touch controllers have an additional IOVCC pin that should be supplied with the digital I/O voltage. The I/O voltage might be provided by another regulator that should also be kept on. Otherwise, the touchscreen can randomly stop functioning if the regulator is turned off because no other components still require it. Document (optional) support for controlling the regulator for IOVCC using "iovcc-supply". Acked-by: Rob Herring Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20210510193108.50178-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov --- diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index bfc3a8b5e1182..2e8da74705132 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -56,6 +56,7 @@ properties: wakeup-source: true vcc-supply: true + iovcc-supply: true gain: description: Allows setting the sensitivity in the range from 0 to 31.