From: Wenpeng Liang <liangwenpeng@huawei.com>
Date: Wed, 16 Jun 2021 10:01:19 +0000 (+0800)
Subject: net: phy: change format of some declarations
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=775f25479df924611fc482a602d147a43ac93702;p=linux.git

net: phy: change format of some declarations

Add a blank line after declarations, change the order of them and put the
assignments and declarations together.

Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c
index 4ac8fd190e9d6..3135634826902 100644
--- a/drivers/net/phy/bcm87xx.c
+++ b/drivers/net/phy/bcm87xx.c
@@ -54,9 +54,9 @@ static int bcm87xx_of_reg_init(struct phy_device *phydev)
 		u16 reg		= be32_to_cpup(paddr++);
 		u16 mask	= be32_to_cpup(paddr++);
 		u16 val_bits	= be32_to_cpup(paddr++);
-		int val;
 		u32 regnum = mdiobus_c45_addr(devid, reg);
-		val = 0;
+		int val = 0;
+
 		if (mask) {
 			val = phy_read(phydev, regnum);
 			if (val < 0) {
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 0d79f68f301c6..10769bfb12984 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -615,6 +615,7 @@ static void prune_rx_ts(struct dp83640_private *dp83640)
 static void enable_broadcast(struct phy_device *phydev, int init_page, int on)
 {
 	int val;
+
 	phy_write(phydev, PAGESEL, 0);
 	val = phy_read(phydev, PHYCR2);
 	if (on)
diff --git a/drivers/net/phy/et1011c.c b/drivers/net/phy/et1011c.c
index 09e07b902d3a3..07bb484ba4020 100644
--- a/drivers/net/phy/et1011c.c
+++ b/drivers/net/phy/et1011c.c
@@ -46,8 +46,8 @@ MODULE_LICENSE("GPL");
 
 static int et1011c_config_aneg(struct phy_device *phydev)
 {
-	int ctl = 0;
-	ctl = phy_read(phydev, MII_BMCR);
+	int ctl = phy_read(phydev, MII_BMCR);
+
 	if (ctl < 0)
 		return ctl;
 	ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 |
@@ -60,9 +60,10 @@ static int et1011c_config_aneg(struct phy_device *phydev)
 
 static int et1011c_read_status(struct phy_device *phydev)
 {
+	static int speed;
 	int ret;
 	u32 val;
-	static int speed;
+
 	ret = genphy_read_status(phydev);
 
 	if (speed != phydev->speed) {
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 6045ad3def123..24665670a89a7 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -175,6 +175,7 @@ EXPORT_SYMBOL(mdiobus_alloc_size);
 static void mdiobus_release(struct device *d)
 {
 	struct mii_bus *bus = to_mii_bus(d);
+
 	BUG_ON(bus->state != MDIOBUS_RELEASED &&
 	       /* for compatibility with error handling in drivers */
 	       bus->state != MDIOBUS_ALLOCATED);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
index d5c1aaa8236a9..30d15f7c9b031 100644
--- a/drivers/net/phy/qsemi.c
+++ b/drivers/net/phy/qsemi.c
@@ -100,6 +100,7 @@ static int qs6612_ack_interrupt(struct phy_device *phydev)
 static int qs6612_config_intr(struct phy_device *phydev)
 {
 	int err;
+
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
 		/* clear any interrupts before enabling them */
 		err = qs6612_ack_interrupt(phydev);