From: Wolfram Sang Date: Wed, 10 Apr 2024 11:24:16 +0000 (+0200) Subject: i2c: bcm-iproc: remove printout on handled timeouts X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=796e2c260187e32530cf343546ba1cdf2e2f5491;p=linux.git i2c: bcm-iproc: remove printout on handled timeouts I2C and SMBus timeouts are not something the user needs to be informed about on controller level. The client driver may know if that really is a problem and give more detailed information to the user. The controller should just pass this information upwards. Remove the printout. Signed-off-by: Wolfram Sang Signed-off-by: Andi Shyti --- diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index e905734c26a04..133d02899c6bd 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -811,8 +811,6 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, } if (!time_left && !iproc_i2c->xfer_is_done) { - dev_err(iproc_i2c->device, "transaction timed out\n"); - /* flush both TX/RX FIFOs */ val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);