From: Ulf Hansson Date: Fri, 29 Jun 2018 11:04:30 +0000 (+0200) Subject: PM / Domains: dt: Add a power-domain-names property X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=79a5c45199cd942047b1cf7bb50ff0699c2a3af0;p=linux.git PM / Domains: dt: Add a power-domain-names property Let's add a power-domain-names property, to allow consumer drivers to match the power-domains specifiers via a list of power domain names. This follows the same concept as for other similar DT bindings. Signed-off-by: Ulf Hansson Tested-by: Rajendra Nayak Reviewed-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki --- diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 9b387f861aed1..4d6bc88294687 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -114,18 +114,26 @@ Required properties: - power-domains : A list of PM domain specifiers, as defined by bindings of the power controller that is the PM domain provider. +Optional properties: + - power-domain-names : A list of power domain name strings sorted in the same + order as the power-domains property. Consumers drivers will use + power-domain-names to match power domains with power-domains + specifiers. + Example: leaky-device@12350000 { compatible = "foo,i-leak-current"; reg = <0x12350000 0x1000>; power-domains = <&power 0>; + power-domain-names = "io"; }; leaky-device@12351000 { compatible = "foo,i-leak-current"; reg = <0x12351000 0x1000>; power-domains = <&power 0>, <&power 1> ; + power-domain-names = "io", "clk"; }; The first example above defines a typical PM domain consumer device, which is