From: Yoshihiro Shimoda Date: Tue, 5 Nov 2019 10:51:29 +0000 (+0900) Subject: PCI: rcar: Fix missing MACCTLR register setting in initialization sequence X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7c7e53e1c93df14690bd12c1f84730fef927a6f1;p=linux.git PCI: rcar: Fix missing MACCTLR register setting in initialization sequence The R-Car Gen2/3 manual - available at: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg1m.html#documents "RZ/G Series User's Manual: Hardware" section strictly enforces the MACCTLR inizialization value - 39.3.1 - "Initial Setting of PCI Express": "Be sure to write the initial value (= H'80FF 0000) to MACCTLR before enabling PCIETCTLR.CFINIT". To avoid unexpected behavior and to match the SW initialization sequence guidelines, this patch programs the MACCTLR with the correct value. Note that the MACCTLR.SPCHG bit in the MACCTLR register description reports that "Only writing 1 is valid and writing 0 is invalid" but this "invalid" has to be interpreted as a write-ignore aka "ignored", not "prohibited". Reported-by: Eugeniu Rosca Fixes: c25da4778803 ("PCI: rcar: Add Renesas R-Car PCIe driver") Fixes: be20bbcb0a8c ("PCI: rcar: Add the initialization of PCIe link in resume_noirq()") Signed-off-by: Yoshihiro Shimoda Signed-off-by: Lorenzo Pieralisi Reviewed-by: Geert Uytterhoeven Cc: # v5.2+ --- diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c index 40d8c54a17d1b..94ba4fe219237 100644 --- a/drivers/pci/controller/pcie-rcar.c +++ b/drivers/pci/controller/pcie-rcar.c @@ -91,8 +91,11 @@ #define LINK_SPEED_2_5GTS (1 << 16) #define LINK_SPEED_5_0GTS (2 << 16) #define MACCTLR 0x011058 +#define MACCTLR_NFTS_MASK GENMASK(23, 16) /* The name is from SH7786 */ #define SPEED_CHANGE BIT(24) #define SCRAMBLE_DISABLE BIT(27) +#define LTSMDIS BIT(31) +#define MACCTLR_INIT_VAL (LTSMDIS | MACCTLR_NFTS_MASK) #define PMSR 0x01105c #define MACS2R 0x011078 #define MACCGSPSETR 0x011084 @@ -613,6 +616,8 @@ static int rcar_pcie_hw_init(struct rcar_pcie *pcie) if (IS_ENABLED(CONFIG_PCI_MSI)) rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR); + rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR); + /* Finish initialization - establish a PCI Express link */ rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR); @@ -1235,6 +1240,7 @@ static int rcar_pcie_resume_noirq(struct device *dev) return 0; /* Re-establish the PCIe link */ + rcar_pci_write_reg(pcie, MACCTLR_INIT_VAL, MACCTLR); rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR); return rcar_pcie_wait_for_dl(pcie); }