From: Hans de Goede Date: Sun, 17 Mar 2024 21:41:23 +0000 (+0100) Subject: serial: 8250_dw: Revert: Do not reclock if already at correct rate X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7dfae6cbadc1ac99e38ad19fb08810b31ff167be;p=linux.git serial: 8250_dw: Revert: Do not reclock if already at correct rate Commit e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") breaks the dw UARTs on Intel Bay Trail (BYT) and Cherry Trail (CHT) SoCs. Before this change the RTL8732BS Bluetooth HCI which is found connected over the dw UART on both BYT and CHT boards works properly: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: RTL: fw version 0x365d462e where as after this change probing it fails: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: command 0xfc20 tx timeout Bluetooth: hci0: RTL: download fw command failed (-110) Revert the changes to fix this regression. Fixes: e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") Cc: stable@vger.kernel.org Cc: Peter Collingbourne Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Peter Collingbourne Link: https://lore.kernel.org/r/20240317214123.34482-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a3acbf0f5da1b..1300c92b8702a 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -356,9 +356,9 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, long rate; int ret; + clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, newrate); - if (rate > 0 && p->uartclk != rate) { - clk_disable_unprepare(d->clk); + if (rate > 0) { /* * Note that any clock-notifer worker will block in * serial8250_update_uartclk() until we are done. @@ -366,8 +366,8 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, ret = clk_set_rate(d->clk, newrate); if (!ret) p->uartclk = rate; - clk_prepare_enable(d->clk); } + clk_prepare_enable(d->clk); dw8250_do_set_termios(p, termios, old); }