From: Paweł Anikiel <pan@semihalf.com>
Date: Fri, 3 Jun 2022 09:23:50 +0000 (+0200)
Subject: ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7e0ed53b074ce8331b5fd7941408fe0c0ca784b1;p=linux.git

ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi

The Mercury+ AA1 is not a standalone board, rather it's a module
with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
are routed to the base board and should be enabled from there.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 184899808ee73..b0dccad58a1d7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1148,7 +1148,6 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_mercury_aa1.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
deleted file mode 100644
index a75c059b6727d..0000000000000
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "socfpga_arria10.dtsi"
-
-/ {
-
-	model = "Enclustra Mercury AA1";
-	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
-
-	aliases {
-		ethernet0 = &gmac0;
-		serial1 = &uart1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-	};
-
-	memory@0 {
-		name = "memory";
-		device_type = "memory";
-		reg = <0x0 0x80000000>; /* 2GB */
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-};
-
-&eccmgr {
-	sdmmca-ecc@ff8c2c00 {
-		compatible = "altr,socfpga-sdmmc-ecc";
-		reg = <0xff8c2c00 0x400>;
-		altr,ecc-parent = <&mmc>;
-		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
-			     <47 IRQ_TYPE_LEVEL_HIGH>,
-			     <16 IRQ_TYPE_LEVEL_HIGH>,
-			     <48 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&gmac0 {
-	phy-mode = "rgmii";
-	phy-addr = <0xffffffff>; /* probe for phy addr */
-
-	max-frame-size = <3800>;
-	status = "okay";
-
-	phy-handle = <&phy3>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy3: ethernet-phy@3 {
-			txd0-skew-ps = <0>; /* -420ps */
-			txd1-skew-ps = <0>; /* -420ps */
-			txd2-skew-ps = <0>; /* -420ps */
-			txd3-skew-ps = <0>; /* -420ps */
-			rxd0-skew-ps = <420>; /* 0ps */
-			rxd1-skew-ps = <420>; /* 0ps */
-			rxd2-skew-ps = <420>; /* 0ps */
-			rxd3-skew-ps = <420>; /* 0ps */
-			txen-skew-ps = <0>; /* -420ps */
-			txc-skew-ps = <1860>; /* 960ps */
-			rxdv-skew-ps = <420>; /* 0ps */
-			rxc-skew-ps = <1680>; /* 780ps */
-			reg = <3>;
-		};
-	};
-};
-
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-	isl12022: isl12022@6f {
-		status = "okay";
-		compatible = "isil,isl12022";
-		reg = <0x6f>;
-	};
-};
-
-/* Following mappings are taken from arria10 socdk dts */
-&mmc {
-	status = "okay";
-	cap-sd-highspeed;
-	broken-cd;
-	bus-width = <4>;
-};
-
-&osc1 {
-	clock-frequency = <33330000>;
-};
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
new file mode 100644
index 0000000000000..4b21351f2694b
--- /dev/null
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "socfpga_arria10.dtsi"
+
+/ {
+
+	model = "Enclustra Mercury AA1";
+	compatible = "enclustra,mercury-aa1", "altr,socfpga-arria10", "altr,socfpga";
+
+	aliases {
+		ethernet0 = &gmac0;
+		serial1 = &uart1;
+	};
+
+	memory@0 {
+		name = "memory";
+		device_type = "memory";
+		reg = <0x0 0x80000000>; /* 2GB */
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&eccmgr {
+	sdmmca-ecc@ff8c2c00 {
+		compatible = "altr,socfpga-sdmmc-ecc";
+		reg = <0xff8c2c00 0x400>;
+		altr,ecc-parent = <&mmc>;
+		interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
+			     <47 IRQ_TYPE_LEVEL_HIGH>,
+			     <16 IRQ_TYPE_LEVEL_HIGH>,
+			     <48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&gmac0 {
+	phy-mode = "rgmii";
+	phy-addr = <0xffffffff>; /* probe for phy addr */
+
+	max-frame-size = <3800>;
+
+	phy-handle = <&phy3>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy3: ethernet-phy@3 {
+			txd0-skew-ps = <0>; /* -420ps */
+			txd1-skew-ps = <0>; /* -420ps */
+			txd2-skew-ps = <0>; /* -420ps */
+			txd3-skew-ps = <0>; /* -420ps */
+			rxd0-skew-ps = <420>; /* 0ps */
+			rxd1-skew-ps = <420>; /* 0ps */
+			rxd2-skew-ps = <420>; /* 0ps */
+			rxd3-skew-ps = <420>; /* 0ps */
+			txen-skew-ps = <0>; /* -420ps */
+			txc-skew-ps = <1860>; /* 960ps */
+			rxdv-skew-ps = <420>; /* 0ps */
+			rxc-skew-ps = <1680>; /* 780ps */
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	isl12022: isl12022@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+};
+
+/* Following mappings are taken from arria10 socdk dts */
+&mmc {
+	cap-sd-highspeed;
+	broken-cd;
+	bus-width = <4>;
+};
+
+&osc1 {
+	clock-frequency = <33330000>;
+};