From: Adam Ford <aford173@gmail.com>
Date: Sun, 13 Dec 2020 18:37:53 +0000 (-0600)
Subject: arm64: dts: renesas: beacon: Enable SPI
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7e0fac6a0da54557230ac3898688f37392404cdf;p=linux.git

arm64: dts: renesas: beacon: Enable SPI

The baseboard routes the SPI to a header which can/will be configured at
either the kit level or using device tree overlays.  Because the baseboard
be supporting more than one kit, enable at the baseboard level rather
than a bunch of duplicates later.

Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201213183759.223246-14-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 987df78ec44ec..cb316e7363643 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -478,6 +478,13 @@
 	};
 };
 
+&msiof1 {
+	pinctrl-0 = <&msiof1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&gpio3 10 GPIO_ACTIVE_LOW>;
+};
+
 &ohci0 {
 	dr_mode = "otg";
 	status = "okay";
@@ -531,6 +538,11 @@
 		bias-pull-down;
 	};
 
+	msiof1_pins: msiof1 {
+		groups = "msiof1_clk_g", "msiof1_rxd_g", "msiof1_txd_g";
+		function = "msiof1";
+	};
+
 	pwm0_pins: pwm0 {
 		groups = "pwm0";
 		function = "pwm0";