From: Christoph Niedermaier Date: Tue, 22 Nov 2022 09:58:31 +0000 (+0100) Subject: dt-bindings: mfd: da9062: Move IRQ to optional properties X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7ef5c57758c4bbf8d5476c3fefcb585e150d116a;p=linux.git dt-bindings: mfd: da9062: Move IRQ to optional properties Move IRQ to optional properties, because the MFD DA9061/62 is usable without IRQ. This makes the chip usable for designs that don't have the IRQ pin connected. Signed-off-by: Christoph Niedermaier Acked-by: Krzysztof Kozlowski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20221122095833.3957-2-cniedermaier@dh-electronics.com --- diff --git a/Documentation/devicetree/bindings/mfd/da9062.txt b/Documentation/devicetree/bindings/mfd/da9062.txt index bab0d0e66cb3c..fe580206e18d6 100644 --- a/Documentation/devicetree/bindings/mfd/da9062.txt +++ b/Documentation/devicetree/bindings/mfd/da9062.txt @@ -33,11 +33,6 @@ Required properties: "dlg,da9061" for DA9061 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. Optional properties: @@ -48,6 +43,12 @@ Optional properties: See Documentation/devicetree/bindings/gpio/gpio.txt for further information on GPIO bindings. +- interrupts : IRQ line information. +- interrupt-controller + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +further information on IRQ bindings. + Sub-nodes: - regulators : This node defines the settings for the LDOs and BUCKs.