From: Claudiu Beznea <claudiu.beznea@microchip.com>
Date: Fri, 26 Aug 2022 08:39:24 +0000 (+0300)
Subject: ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=7f41d52ced9e;p=linux.git
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
---
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index de44da2e4aae2..3b25c67795ddb 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -244,8 +244,8 @@
regulators {
vdd_3v3: VDD_IO {
regulator-name = "VDD_IO";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -264,8 +264,8 @@
vddioddr: VDD_DDR {
regulator-name = "VDD_DDR";
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1450000>;
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -285,8 +285,8 @@
vddcore: VDD_CORE {
regulator-name = "VDD_CORE";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1850000>;
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-always-on;
@@ -306,7 +306,7 @@
vddcpu: VDD_OTHER {
regulator-name = "VDD_OTHER";
regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1850000>;
+ regulator-max-microvolt = <1250000>;
regulator-initial-mode = <2>;
regulator-allowed-modes = <2>, <4>;
regulator-ramp-delay = <3125>;
@@ -326,8 +326,8 @@
vldo1: LDO1 {
regulator-name = "LDO1";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3700000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-state-standby {