From: Oleksij Rempel Date: Fri, 24 Jun 2022 07:51:38 +0000 (+0200) Subject: net: asix: fix "can't send until first packet is send" issue X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=805206e66fab4ba1e0ebd19402006d62cd1d4902;p=linux.git net: asix: fix "can't send until first packet is send" issue If cable is attached after probe sequence, the usbnet framework would not automatically start processing RX packets except at least one packet was transmitted. On systems with any kind of address auto configuration this issue was not detected, because some packets are send immediately after link state is changed to "running". With this patch we will notify usbnet about link status change provided by the PHYlib. Fixes: e532a096be0e ("net: usb: asix: ax88772: add phylib support") Reported-by: Anton Lundin Signed-off-by: Oleksij Rempel Tested-by: Anton Lundin Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c index 632fa6c1d5e30..b4a1b7abcfc97 100644 --- a/drivers/net/usb/asix_common.c +++ b/drivers/net/usb/asix_common.c @@ -431,6 +431,7 @@ void asix_adjust_link(struct net_device *netdev) asix_write_medium_mode(dev, mode, 0); phy_print_status(phydev); + usbnet_link_change(dev, phydev->link, 0); } int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)