From: Uwe Kleine-König Date: Fri, 26 Mar 2021 08:18:04 +0000 (+0100) Subject: pwm: bcm-kona: Don't modify HW state in .remove callback X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=819e82460ac858cdca38f748829979602a7708ee;p=linux.git pwm: bcm-kona: Don't modify HW state in .remove callback A consumer is expected to disable a PWM before calling pwm_put(). And if they didn't there is hopefully a good reason (or the consumer needs fixing.) Also if disabling an enabled PWM was the right thing to do, this should better be done in the framework instead of in each low level driver. So drop the hardware modification from the .remove() callback. Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding --- diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c index f09a310428599..800b9edf2e715 100644 --- a/drivers/pwm/pwm-bcm-kona.c +++ b/drivers/pwm/pwm-bcm-kona.c @@ -310,11 +310,6 @@ static int kona_pwmc_probe(struct platform_device *pdev) static int kona_pwmc_remove(struct platform_device *pdev) { struct kona_pwmc *kp = platform_get_drvdata(pdev); - unsigned int chan; - - for (chan = 0; chan < kp->chip.npwm; chan++) - if (pwm_is_enabled(&kp->chip.pwms[chan])) - clk_disable_unprepare(kp->clk); return pwmchip_remove(&kp->chip); }