From: Jagan Teki <jagan@amarulasolutions.com>
Date: Mon, 20 Jul 2020 10:58:46 +0000 (+0530)
Subject: ARM: dts: rockchip: Add usb host0 ohci node for rk3288
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=82540defdd9cfc491f564ffb8d01911966636bc7;p=linux.git

ARM: dts: rockchip: Add usb host0 ohci node for rk3288

rk3288 and rk3288w have a usb host0 ohci controller.

Although rk3288 ohci doesn't actually work on hardware, but
rk3288w ohci can work well.

So add usb host0 ohci node in rk3288 dtsi and boards
can then enable it if supported.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Cc: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20200720105846.367776-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 9fa11b9f45221..68d5a58cfe889 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -616,7 +616,16 @@
 		status = "disabled";
 	};
 
-	/* NOTE: ohci@ff520000 doesn't actually work on hardware */
+	/* NOTE: doesn't work on RK3288, but was fixed on RK3288W */
+	usb_host0_ohci: usb@ff520000 {
+		compatible = "generic-ohci";
+		reg = <0x0 0xff520000 0x0 0x100>;
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_USBHOST0>;
+		phys = <&usbphy1>;
+		phy-names = "usb";
+		status = "disabled";
+	};
 
 	usb_host1: usb@ff540000 {
 		compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",