From: Marijn Suijten Date: Sun, 30 Oct 2022 07:32:29 +0000 (+0100) Subject: arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=85eef5cb65ab7e8905725d13c98c90442bb93dbc;p=linux.git arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot) Without power the SDCard slot / hardware remains dormant. Like many other platforms these regulators are used exclusively by SDHCI, and have their maximum voltage decreased to what downstream sets on the consumer side. Additionally the SDHCI driver supports setting a load, for which the regulator definition is extended much the same. Signed-off-by: Marijn Suijten Reviewed-by: Konrad Dybcio Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20221030073232.22726-8-marijn.suijten@somainline.org --- diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts index 1aaa9612b061f..5cb76026ef676 100644 --- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -219,8 +219,13 @@ pm6150l_l6: ldo6 { regulator-min-microvolt = <1700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2950000>; regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; pm6150l_l7: ldo7 { @@ -237,8 +242,13 @@ pm6150l_l9: ldo9 { regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <3544000>; + regulator-max-microvolt = <2960000>; regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = + ; + }; pm6150l_l10: ldo10 { @@ -300,6 +310,9 @@ &sdhc_2 { status = "okay"; + vmmc-supply = <&pm6150l_l9>; + vqmmc-supply = <&pm6150l_l6>; + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; };