From: Martin Blumenstingl Date: Sat, 29 Dec 2018 12:57:11 +0000 (+0100) Subject: ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8615f5596335db0978cea593dcd0070dc5f8b116;p=linux.git ARM: dts: meson8m2: mxiii-plus: mark the SD card detection GPIO active-low After commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree") SD cards are not detected anymore. The CD GPIO is "active low" on the MXIII-Plus. The MMC dt-bindings specify: "[...] using the "cd-inverted" property means, that the CD line is active high, i.e. it is high, when a card is inserted". Fix the description of the SD card by marking it as GPIO_ACTIVE_LOW and drop the "cd-inverted" property. This makes the definition consistent with the existing dt-bindings and fixes the check whether an SD card is inserted. Fixes: 35ee52bea66c74 ("ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus") Signed-off-by: Martin Blumenstingl Reviewed-by: Linus Walleij Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts index f5853610b20b8..6ac02beb5fa72 100644 --- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts +++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts @@ -206,8 +206,7 @@ cap-sd-highspeed; disable-wp; - cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; vmmc-supply = <&vcc_3v3>; };