From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 10 Sep 2017 18:02:33 +0000 (+0200)
Subject: ARM: dts: Flags D-Link DIR-685 I2C bus gpios
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8632a6615110ec2de1630762721fe66e1d939e46;p=linux.git

ARM: dts: Flags D-Link DIR-685 I2C bus gpios

These GPIOs are used in open drain mode, so make sure to
flag them as such. Use the new separate scl/sda line
GPIO bindings.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index e75e2d44371cd..a0f471eb35d49 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -99,8 +99,8 @@
 	gpio-i2c {
 		compatible = "i2c-gpio";
 		/* Collides with ICE */
-		gpios = <&gpio0 5 0>, /* SDA */
-			<&gpio0 6 0>; /* SCL */
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;