From: Lee Jones <lee.jones@linaro.org>
Date: Fri, 7 Dec 2012 13:46:01 +0000 (+0000)
Subject: ARM: ux500: Setup correct settling time for the MMCI regulator
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=874c920241640595da77622b6ee98c14e79296e4;p=linux.git

ARM: ux500: Setup correct settling time for the MMCI regulator

The GPIO controlled MMCI regulator used on the ux5x0 boards takes
100us to settle. There's already a binding to provide such
information. Let's make use of it.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index b5e73aa4c3c23..d765c38afebf3 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -679,6 +679,7 @@
 			regulator-name = "mmci-reg";
 			regulator-type = "voltage";
 
+			startup-delay-us = <100>;
 			enable-active-high;
 
 			states = <1800000 0x1