From: Sven Eckelmann Date: Wed, 23 May 2018 08:11:24 +0000 (+0300) Subject: ath: Add regulatory mapping for ETSI9_WORLD X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=897fab6c5d901398beaeb4d764b1816fbed9c488;p=linux.git ath: Add regulatory mapping for ETSI9_WORLD The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 95a378e6a88b8..66932c55d352f 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -45,6 +45,7 @@ enum EnumRd { ETSI5_WORLD = 0x39, ETSI6_WORLD = 0x34, ETSI8_WORLD = 0x3D, + ETSI9_WORLD = 0x3E, ETSI_RESERVED = 0x33, MKK1_MKKA = 0x40, @@ -183,6 +184,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {ETSI5_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI6_WORLD, CTL_ETSI, CTL_ETSI}, {ETSI8_WORLD, CTL_ETSI, CTL_ETSI}, + {ETSI9_WORLD, CTL_ETSI, CTL_ETSI}, /* XXX: For ETSI3_ETSIA, Was NO_CTL meant for the 2 GHz band ? */ {ETSI3_ETSIA, CTL_ETSI, CTL_ETSI},