From: Wenchao Chen Date: Mon, 4 Dec 2023 06:49:34 +0000 (+0800) Subject: mmc: sdhci-sprd: Fix eMMC init failure after hw reset X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8abf77c88929b6d20fa4f9928b18d6448d64e293;p=linux.git mmc: sdhci-sprd: Fix eMMC init failure after hw reset Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this. Signed-off-by: Wenchao Chen Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K") Reviewed-by: Baolin Wang Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson --- diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c index 6b8a57e2d20f0..bed57a1c64b52 100644 --- a/drivers/mmc/host/sdhci-sprd.c +++ b/drivers/mmc/host/sdhci-sprd.c @@ -239,15 +239,19 @@ static inline void _sdhci_sprd_set_clock(struct sdhci_host *host, div = ((div & 0x300) >> 2) | ((div & 0xFF) << 8); sdhci_enable_clk(host, div); + val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); + mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; /* Enable CLK_AUTO when the clock is greater than 400K. */ if (clk > 400000) { - val = sdhci_readl(host, SDHCI_SPRD_REG_32_BUSY_POSI); - mask = SDHCI_SPRD_BIT_OUTR_CLK_AUTO_EN | - SDHCI_SPRD_BIT_INNR_CLK_AUTO_EN; if (mask != (val & mask)) { val |= mask; sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); } + } else { + if (val & mask) { + val &= ~mask; + sdhci_writel(host, val, SDHCI_SPRD_REG_32_BUSY_POSI); + } } }