From: Emil Renner Berthing Date: Wed, 12 Oct 2022 11:09:28 +0000 (+0200) Subject: riscv: dts: sifive unleashed: Add PWM controlled LEDs X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8bc8824d30193eb7755043d5bb65fa7f0d11a595;p=linux.git riscv: dts: sifive unleashed: Add PWM controlled LEDs This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device tree. The schematic doesn't specify any special function for the LEDs, so they're added here without any default triggers and named d1, d2, d3 and d4 just like in the schematic. Signed-off-by: Emil Renner Berthing Reviewed-by: Conor Dooley Tested-by: Conor Dooley Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt --- diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts index ced0d4e479385..900a50526d771 100644 --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts @@ -3,6 +3,8 @@ #include "fu540-c000.dtsi" #include +#include +#include /* Clock frequency (in Hz) of the PCB crystal for rtcclk */ #define RTCCLK_FREQ 1000000 @@ -42,6 +44,42 @@ compatible = "gpio-restart"; gpios = <&gpio 10 GPIO_ACTIVE_LOW>; }; + + led-controller { + compatible = "pwm-leds"; + + led-d1 { + pwms = <&pwm0 0 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = ; + max-brightness = <255>; + label = "d1"; + }; + + led-d2 { + pwms = <&pwm0 1 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = ; + max-brightness = <255>; + label = "d2"; + }; + + led-d3 { + pwms = <&pwm0 2 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = ; + max-brightness = <255>; + label = "d3"; + }; + + led-d4 { + pwms = <&pwm0 3 7812500 PWM_POLARITY_INVERTED>; + active-low; + color = ; + max-brightness = <255>; + label = "d4"; + }; + }; }; &uart0 {