From: Marc Kleine-Budde <mkl@pengutronix.de>
Date: Tue, 27 Sep 2022 15:14:09 +0000 (+0200)
Subject: can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8e0a0b32c4ff7a5c2654a5f8fc37a9f1b6f58816;p=linux.git

can: bittiming: can_get_bittiming(): use direct return and remove unneeded else

Clean up the code flow a bit, don't assign err variable but directly
return. Remove the unneeded else, too.

Link: https://lore.kernel.org/all/20230202110854.2318594-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---

diff --git a/drivers/net/can/dev/bittiming.c b/drivers/net/can/dev/bittiming.c
index e4917c2f34d3b..263e46a1f6482 100644
--- a/drivers/net/can/dev/bittiming.c
+++ b/drivers/net/can/dev/bittiming.c
@@ -67,22 +67,18 @@ int can_get_bittiming(const struct net_device *dev, struct can_bittiming *bt,
 		      const u32 *bitrate_const,
 		      const unsigned int bitrate_const_cnt)
 {
-	int err;
-
 	/* Depending on the given can_bittiming parameter structure the CAN
 	 * timing parameters are calculated based on the provided bitrate OR
 	 * alternatively the CAN timing parameters (tq, prop_seg, etc.) are
 	 * provided directly which are then checked and fixed up.
 	 */
 	if (!bt->tq && bt->bitrate && btc)
-		err = can_calc_bittiming(dev, bt, btc);
-	else if (bt->tq && !bt->bitrate && btc)
-		err = can_fixup_bittiming(dev, bt, btc);
-	else if (!bt->tq && bt->bitrate && bitrate_const)
-		err = can_validate_bitrate(dev, bt, bitrate_const,
-					   bitrate_const_cnt);
-	else
-		err = -EINVAL;
+		return can_calc_bittiming(dev, bt, btc);
+	if (bt->tq && !bt->bitrate && btc)
+		return can_fixup_bittiming(dev, bt, btc);
+	if (!bt->tq && bt->bitrate && bitrate_const)
+		return can_validate_bitrate(dev, bt, bitrate_const,
+					    bitrate_const_cnt);
 
-	return err;
+	return -EINVAL;
 }