From: Soren Brinkmann <soren.brinkmann@xilinx.com>
Date: Sat, 5 Apr 2014 00:23:45 +0000 (-0700)
Subject: ARM: zynq: DT: Migrate UART to Cadence binding
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=8fe9346b945d76ddb3f08c00e34d701174c62fa0;p=linux.git

ARM: zynq: DT: Migrate UART to Cadence binding

The Zynq UART is Cadence IP and the driver has been renamed accordingly.
Migrate the DT to use the new binding for the UART driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 760bbc463c5b1..029cbac304545 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -105,19 +105,19 @@
 		};
 
 		uart0: serial@e0000000 {
-			compatible = "xlnx,xuartps";
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 23>, <&clkc 40>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
 		};
 
 		uart1: serial@e0001000 {
-			compatible = "xlnx,xuartps";
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 24>, <&clkc 41>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
 		};