From: Peter Chen Date: Mon, 5 Feb 2018 03:50:56 +0000 (+0800) Subject: usb: host: ehci: always enable interrupt for qtd completion at test mode X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=91b119359c1c3033a6621909d3c5dbbdf201d6b4;p=linux.git usb: host: ehci: always enable interrupt for qtd completion at test mode At former code, the SETUP stage does not enable interrupt for qtd completion, it relies on IAA watchdog to complete interrupt, then the transcation would be considered timeout if the flag need_io_watchdog is cleared by platform code. In this commit, we always add enable interrupt for qtd completion, then the qtd completion can be notified by hardware interrupt. Signed-off-by: Peter Chen Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 88158324dcae2..3276304056952 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1188,10 +1188,10 @@ static int submit_single_step_set_feature( * 15 secs after the setup */ if (is_setup) { - /* SETUP pid */ + /* SETUP pid, and interrupt after SETUP completion */ qtd_fill(ehci, qtd, urb->setup_dma, sizeof(struct usb_ctrlrequest), - token | (2 /* "setup" */ << 8), 8); + QTD_IOC | token | (2 /* "setup" */ << 8), 8); submit_async(ehci, urb, &qtd_list, GFP_ATOMIC); return 0; /*Return now; we shall come back after 15 seconds*/ @@ -1228,12 +1228,8 @@ static int submit_single_step_set_feature( qtd_prev->hw_next = QTD_NEXT(ehci, qtd->qtd_dma); list_add_tail(&qtd->qtd_list, head); - /* dont fill any data in such packets */ - qtd_fill(ehci, qtd, 0, 0, token, 0); - - /* by default, enable interrupt on urb completion */ - if (likely(!(urb->transfer_flags & URB_NO_INTERRUPT))) - qtd->hw_token |= cpu_to_hc32(ehci, QTD_IOC); + /* Interrupt after STATUS completion */ + qtd_fill(ehci, qtd, 0, 0, token | QTD_IOC, 0); submit_async(ehci, urb, &qtd_list, GFP_KERNEL);