From: Matti Vaittinen Date: Thu, 18 Nov 2021 11:49:30 +0000 (+0200) Subject: regulator: Add units to limit documentation X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=92b1348277f8893671e5354adde64fe3cf462821;p=linux.git regulator: Add units to limit documentation The documentation for limits used at protection level setting did not mention the units. Fix the units in documentation to match values passed in from device-tree (uV, uA, Kelvin) to avoid confusion. Signed-off-by: Matti Vaittinen Link: https://lore.kernel.org/r/111114aca991e41e49a32f89b74e95285f07c1e3.1637233864.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown --- diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index bd7a73db2e66c..1cb8071fee343 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -101,11 +101,13 @@ enum regulator_detection_severity { * is requested. * @set_over_voltage_protection: Support enabling of and setting limits for over * voltage situation detection. Detection can be configured for same - * severities as over current protection. + * severities as over current protection. Units of uV. * @set_under_voltage_protection: Support enabling of and setting limits for - * under situation detection. + * under voltage situation detection. Detection can be configured for same + * severities as over current protection. Units of uV. * @set_thermal_protection: Support enabling of and setting limits for over - * temperature situation detection. + * temperature situation detection.Detection can be configured for same + * severities as over current protection. Units of degree Kelvin. * * @set_active_discharge: Set active discharge enable/disable of regulators. *