From: Michael Srba <Michael.Srba@seznam.cz>
Date: Fri, 4 Jun 2021 17:27:39 +0000 (+0200)
Subject: arm64: dts: qcom: msm8916-samsung-a3u: Add touch key regulators
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=92b5c3975b3b582c6d558f74c65e3ff8b58d9dac;p=linux.git

arm64: dts: qcom: msm8916-samsung-a3u: Add touch key regulators

The touch key MCU and LED is supplied by two separate fixed regulators
that can be enabled through GPIO 86 and 60. Add them to the device tree.

Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
[stephan: extend commit message]
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210604172742.10593-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
index 661f41ad978bf..6cc2eaeb1d33d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts
@@ -20,6 +20,37 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&panel_vdd3_default>;
 	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+
+		gpio = <&msmgpio 86 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
+
+	reg_key_led: regulator-key-led {
+		compatible = "regulator-fixed";
+		regulator-name = "key_led";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_led_en_default>;
+	};
+};
+
+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_key_led>;
 };
 
 &accelerometer {
@@ -81,6 +112,22 @@
 		bias-disable;
 	};
 
+	tkey_en_default: tkey-en-default {
+		pins = "gpio86";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	tkey_led_en_default: tkey-led-en-default {
+		pins = "gpio60";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	ts_int_default: ts-int-default {
 		pins = "gpio13";
 		function = "gpio";