From: Thierry Reding Date: Tue, 23 Jun 2020 14:55:27 +0000 (+0200) Subject: dt-bindings: pci: tegra: Remove PLL power supplies X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=980d1f2f3db618b58f9d1dab82534286e9e3cff1;p=linux.git dt-bindings: pci: tegra: Remove PLL power supplies The XUSB pad controller, which provides access to various USB, PCI and SATA pads (or PHYs), needs to bring up the PLLs associated with these pads. In order to properly do so, it needs to control the power supplied to these PLLs. Remove the PLL power supplies from the PCIe controller because it does not need direct access to them. Instead it will only use the configured pads provided by the XUSB pad controller. Link: https://lore.kernel.org/r/20200623145528.1658337-1-thierry.reding@gmail.com Signed-off-by: Thierry Reding Signed-off-by: Lorenzo Pieralisi Reviewed-by: Rob Herring --- diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 7939bca478612..d099f3476cccd 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -112,28 +112,16 @@ Power supplies for Tegra124: - Required: - avddio-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. - - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must - supply 1.05 V. - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 3.3 V. - - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3). - Must supply 3.3 V. - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 2.8-3.3 V. - - avdd-pll-erefe-supply: Power supply for PLLE (shared with USB3). Must - supply 1.05 V. Power supplies for Tegra210: - Required: - - avdd-pll-uerefe-supply: Power supply for PLLE (shared with USB3). Must - supply 1.05 V. - hvddio-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. Must supply 1.8 V. - dvddio-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. - - dvdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must - supply 1.05 V. - - hvdd-pex-pll-e-supply: High-voltage supply for PLLE (shared with USB3). - Must supply 3.3 V. - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 1.8 V.