From: Yannic Moog <y.moog@phytec.de>
Date: Thu, 22 Feb 2024 12:28:51 +0000 (+0100)
Subject: arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9910ce9a6bc1a0138c0c0723a83b3b57bbe37f83;p=linux.git

arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140

Set Pull Resistors Enable bit to put signal into a defined state.

Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
index 7df8fafbbb904..b2579fd551915 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
@@ -386,8 +386,8 @@
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x40
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x40
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
 		>;
 	};