From: Maxime Ripard <maxime.ripard@bootlin.com>
Date: Wed, 21 Nov 2018 10:57:49 +0000 (+0100)
Subject: ARM: dts: sun8i: BPI-M2M: Remove i2c nodes
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9c4273ee02f68ce39916f3c9c10b6c01dd5bfa42;p=linux.git

ARM: dts: sun8i: BPI-M2M: Remove i2c nodes

The i2c nodes were pre-populated to ease the use of overlays. However, now
that we provide default muxing options for those nodes, the one in the DTS
don't provide any content at all.

Remove them.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
---

diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
index f613889f445ba..83d32a1a2a638 100644
--- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
+++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts
@@ -124,21 +124,6 @@
 	status = "okay";
 };
 
-/* This is the i2c bus exposed on the DSI connector for the touch panel */
-&i2c0 {
-	status = "disabled";
-};
-
-/* This is the i2c bus exposed on the GPIO header */
-&i2c1 {
-	status = "disabled";
-};
-
-/* This is the i2c bus exposed on the CSI connector to control the sensor */
-&i2c2 {
-	status = "disabled";
-};
-
 &mmc0 {
 	vmmc-supply = <&reg_dcdc1>;
 	bus-width = <4>;