From: Adam Ford <aford173@gmail.com>
Date: Thu, 15 Jun 2023 21:53:12 +0000 (-0500)
Subject: arm64: dts: imx8mm-beacon: Change camera I2C address
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9c9b11871bdaa29f9bf4dc4b6f819917d824836b;p=linux.git

arm64: dts: imx8mm-beacon: Change camera I2C address

The DSI to HDMI bridge uses the address currently assigned to
the camera, so change the camera address to the alternative
address of 0x10 in preparation to enable the bridge.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
---

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index bc531175ff765..d5c6fc68d656e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -141,11 +141,11 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	camera@3c {
+	camera@10 {
 		compatible = "ovti,ov5640";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ov5640>;
-		reg = <0x3c>;
+		reg = <0x10>;
 		clocks = <&clk IMX8MM_CLK_CLKO1>;
 		clock-names = "xclk";
 		assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;