From: Ansuel Smith <ansuelsmth@gmail.com>
Date: Sat, 9 Oct 2021 22:46:17 +0000 (+0200)
Subject: net: phy: at803x: enable prefer master for 83xx internal phy
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9d1c29b4028557a496be9c5eb2b4b86063700636;p=linux.git

net: phy: at803x: enable prefer master for 83xx internal phy

From original QCA source code the port was set to prefer master as port
type in 1000BASE-T mode. Apply the same settings also here.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index df76e7f1141cd..76a1d4629b6c5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1328,6 +1328,9 @@ static int qca83xx_config_init(struct phy_device *phydev)
 		at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
 				      QCA8327_DEBUG_MANU_CTRL_EN, 0);
 
+	/* Following original QCA sourcecode set port to prefer master */
+	phy_set_bits(phydev, MII_CTRL1000, CTL1000_PREFER_MASTER);
+
 	return 0;
 }