From: Linus Torvalds Date: Thu, 29 Apr 2021 18:57:23 +0000 (-0700) Subject: Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev... X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9d31d2338950293ec19d9b095fbaa9030899dcb4;p=linux.git Merge tag 'net-next-5.13' of git://git./linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - bpf: - allow bpf programs calling kernel functions (initially to reuse TCP congestion control implementations) - enable task local storage for tracing programs - remove the need to store per-task state in hash maps, and allow tracing programs access to task local storage previously added for BPF_LSM - add bpf_for_each_map_elem() helper, allowing programs to walk all map elements in a more robust and easier to verify fashion - sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT redirection - lpm: add support for batched ops in LPM trie - add BTF_KIND_FLOAT support - mostly to allow use of BTF on s390 which has floats in its headers files - improve BPF syscall documentation and extend the use of kdoc parsing scripts we already employ for bpf-helpers - libbpf, bpftool: support static linking of BPF ELF files - improve support for encapsulation of L2 packets - xdp: restructure redirect actions to avoid a runtime lookup, improving performance by 4-8% in microbenchmarks - xsk: build skb by page (aka generic zerocopy xmit) - improve performance of software AF_XDP path by 33% for devices which don't need headers in the linear skb part (e.g. virtio) - nexthop: resilient next-hop groups - improve path stability on next-hops group changes (incl. offload for mlxsw) - ipv6: segment routing: add support for IPv4 decapsulation - icmp: add support for RFC 8335 extended PROBE messages - inet: use bigger hash table for IP ID generation - tcp: deal better with delayed TX completions - make sure we don't give up on fast TCP retransmissions only because driver is slow in reporting that it completed transmitting the original - tcp: reorder tcp_congestion_ops for better cache locality - mptcp: - add sockopt support for common TCP options - add support for common TCP msg flags - include multiple address ids in RM_ADDR - add reset option support for resetting one subflow - udp: GRO L4 improvements - improve 'forward' / 'frag_list' co-existence with UDP tunnel GRO, allowing the first to take place correctly even for encapsulated UDP traffic - micro-optimize dev_gro_receive() and flow dissection, avoid retpoline overhead on VLAN and TEB GRO - use less memory for sysctls, add a new sysctl type, to allow using u8 instead of "int" and "long" and shrink networking sysctls - veth: allow GRO without XDP - this allows aggregating UDP packets before handing them off to routing, bridge, OvS, etc. - allow specifing ifindex when device is moved to another namespace - netfilter: - nft_socket: add support for cgroupsv2 - nftables: add catch-all set element - special element used to define a default action in case normal lookup missed - use net_generic infra in many modules to avoid allocating per-ns memory unnecessarily - xps: improve the xps handling to avoid potential out-of-bound accesses and use-after-free when XPS change race with other re-configuration under traffic - add a config knob to turn off per-cpu netdev refcnt to catch underflows in testing Device APIs: - add WWAN subsystem to organize the WWAN interfaces better and hopefully start driving towards more unified and vendor- independent APIs - ethtool: - add interface for reading IEEE MIB stats (incl. mlx5 and bnxt support) - allow network drivers to dump arbitrary SFP EEPROM data, current offset+length API was a poor fit for modern SFP which define EEPROM in terms of pages (incl. mlx5 support) - act_police, flow_offload: add support for packet-per-second policing (incl. offload for nfp) - psample: add additional metadata attributes like transit delay for packets sampled from switch HW (and corresponding egress and policy-based sampling in the mlxsw driver) - dsa: improve support for sandwiched LAGs with bridge and DSA - netfilter: - flowtable: use direct xmit in topologies with IP forwarding, bridging, vlans etc. - nftables: counter hardware offload support - Bluetooth: - improvements for firmware download w/ Intel devices - add support for reading AOSP vendor capabilities - add support for virtio transport driver - mac80211: - allow concurrent monitor iface and ethernet rx decap - set priority and queue mapping for injected frames - phy: add support for Clause-45 PHY Loopback - pci/iov: add sysfs MSI-X vector assignment interface to distribute MSI-X resources to VFs (incl. mlx5 support) New hardware/drivers: - dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit interfaces. - dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and BCM63xx switches - Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches - ath11k: support for QCN9074 a 802.11ax device - Bluetooth: Broadcom BCM4330 and BMC4334 - phy: Marvell 88X2222 transceiver support - mdio: add BCM6368 MDIO mux bus controller - r8152: support RTL8153 and RTL8156 (USB Ethernet) chips - mana: driver for Microsoft Azure Network Adapter (MANA) - Actions Semi Owl Ethernet MAC - can: driver for ETAS ES58X CAN/USB interfaces Pure driver changes: - add XDP support to: enetc, igc, stmmac - add AF_XDP support to: stmmac - virtio: - page_to_skb() use build_skb when there's sufficient tailroom (21% improvement for 1000B UDP frames) - support XDP even without dedicated Tx queues - share the Tx queues with the stack when necessary - mlx5: - flow rules: add support for mirroring with conntrack, matching on ICMP, GTP, flex filters and more - support packet sampling with flow offloads - persist uplink representor netdev across eswitch mode changes - allow coexistence of CQE compression and HW time-stamping - add ethtool extended link error state reporting - ice, iavf: support flow filters, UDP Segmentation Offload - dpaa2-switch: - move the driver out of staging - add spanning tree (STP) support - add rx copybreak support - add tc flower hardware offload on ingress traffic - ionic: - implement Rx page reuse - support HW PTP time-stamping - octeon: support TC hardware offloads - flower matching on ingress and egress ratelimitting. - stmmac: - add RX frame steering based on VLAN priority in tc flower - support frame preemption (FPE) - intel: add cross time-stamping freq difference adjustment - ocelot: - support forwarding of MRP frames in HW - support multiple bridges - support PTP Sync one-step timestamping - dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like learning, flooding etc. - ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350, SC7280 SoCs) - mt7601u: enable TDLS support - mt76: - add support for 802.3 rx frames (mt7915/mt7615) - mt7915 flash pre-calibration support - mt7921/mt7663 runtime power management fixes" * tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits) net: selftest: fix build issue if INET is disabled net: netrom: nr_in: Remove redundant assignment to ns net: tun: Remove redundant assignment to ret net: phy: marvell: add downshift support for M88E1240 net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255 net/sched: act_ct: Remove redundant ct get and check icmp: standardize naming of RFC 8335 PROBE constants bpf, selftests: Update array map tests for per-cpu batched ops bpf: Add batched ops support for percpu array bpf: Implement formatted output helpers with bstr_printf seq_file: Add a seq_bprintf function sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues net:nfc:digital: Fix a double free in digital_tg_recv_dep_req net: fix a concurrency bug in l2tp_tunnel_register() net/smc: Remove redundant assignment to rc mpls: Remove redundant assignment to err llc2: Remove redundant assignment to rc net/tls: Remove redundant initialization of record rds: Remove redundant assignment to nr_sig dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 ... --- 9d31d2338950293ec19d9b095fbaa9030899dcb4 diff --cc arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 9506f0669eadd,79e7c4909a6a4..eca06a0c3cf87 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@@ -1110,14 -1114,14 +1110,20 @@@ full-duplex; }; }; + + rcec@1f,0 { + reg = <0x00f800 0 0 0 0>; + /* IEP INT_A */ + interrupts = ; + }; }; + /* Integrated Endpoint Register Block */ + ierb@1f0800000 { + compatible = "fsl,ls1028a-enetc-ierb"; + reg = <0x01 0xf0800000 0x0 0x10000>; + }; + rcpm: power-controller@1e34040 { compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+"; reg = <0x0 0x1e34040 0x0 0x1c>; diff --cc drivers/s390/net/qeth_core_main.c index 175b82b98f369,6954d4e831a3c..a1f08e9aa064c --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@@ -1420,16 -1451,9 +1420,16 @@@ static void qeth_clear_output_buffer(st atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY); } +static void qeth_free_out_buf(struct qeth_qdio_out_buffer *buf) +{ + if (buf->aob) + qdio_release_aob(buf->aob); + kmem_cache_free(qeth_qdio_outbuf_cache, buf); +} + static void qeth_tx_complete_pending_bufs(struct qeth_card *card, struct qeth_qdio_out_q *queue, - bool drain) + bool drain, int budget) { struct qeth_qdio_out_buffer *buf, *tmp; @@@ -1441,10 -1465,10 +1441,10 @@@ if (drain) qeth_notify_skbs(queue, buf, TX_NOTIFY_GENERALERROR); - qeth_tx_complete_buf(buf, drain, 0); + qeth_tx_complete_buf(buf, drain, budget); list_del(&buf->list_entry); - kmem_cache_free(qeth_qdio_outbuf_cache, buf); + qeth_free_out_buf(buf); } } } diff --cc net/bluetooth/smp.c index 21e445993f39c,5c17acfb16457..372e3b25aaa4c --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@@ -1386,9 -1389,9 +1389,9 @@@ static struct smp_chan *smp_chan_create goto zfree_smp; } - smp->tfm_ecdh = crypto_alloc_kpp("ecdh", 0, 0); + smp->tfm_ecdh = crypto_alloc_kpp("ecdh-nist-p256", 0, 0); if (IS_ERR(smp->tfm_ecdh)) { - BT_ERR("Unable to create ECDH crypto context"); + bt_dev_err(hcon->hdev, "Unable to create ECDH crypto context"); goto free_shash; } @@@ -3281,9 -3296,9 +3296,9 @@@ static struct l2cap_chan *smp_add_cid(s return ERR_CAST(tfm_cmac); } - tfm_ecdh = crypto_alloc_kpp("ecdh", 0, 0); + tfm_ecdh = crypto_alloc_kpp("ecdh-nist-p256", 0, 0); if (IS_ERR(tfm_ecdh)) { - BT_ERR("Unable to create ECDH crypto context"); + bt_dev_err(hdev, "Unable to create ECDH crypto context"); crypto_free_shash(tfm_cmac); kfree_sensitive(smp); return ERR_CAST(tfm_ecdh); diff --cc net/nfc/nci/uart.c index 9958b37d8f9d7,6af5752cde092..1248faf4d6dfa --- a/net/nfc/nci/uart.c +++ b/net/nfc/nci/uart.c @@@ -229,72 -229,6 +229,72 @@@ static void nci_uart_tty_wakeup(struct nci_uart_tx_wakeup(nu); } +/* -- Default recv_buf handler -- + * + * This handler supposes that NCI frames are sent over UART link without any + * framing. It reads NCI header, retrieve the packet size and once all packet + * bytes are received it passes it to nci_uart driver for processing. + */ +static int nci_uart_default_recv_buf(struct nci_uart *nu, const u8 *data, + int count) +{ + int chunk_len; + + if (!nu->ndev) { + nfc_err(nu->tty->dev, + "receive data from tty but no NCI dev is attached yet, drop buffer\n"); + return 0; + } + + /* Decode all incoming data in packets + * and enqueue then for processing. + */ + while (count > 0) { + /* If this is the first data of a packet, allocate a buffer */ + if (!nu->rx_skb) { + nu->rx_packet_len = -1; + nu->rx_skb = nci_skb_alloc(nu->ndev, + NCI_MAX_PACKET_SIZE, + GFP_ATOMIC); + if (!nu->rx_skb) + return -ENOMEM; + } + + /* Eat byte after byte till full packet header is received */ + if (nu->rx_skb->len < NCI_CTRL_HDR_SIZE) { + skb_put_u8(nu->rx_skb, *data++); + --count; + continue; + } + + /* Header was received but packet len was not read */ + if (nu->rx_packet_len < 0) + nu->rx_packet_len = NCI_CTRL_HDR_SIZE + + nci_plen(nu->rx_skb->data); + + /* Compute how many bytes are missing and how many bytes can + * be consumed. + */ + chunk_len = nu->rx_packet_len - nu->rx_skb->len; + if (count < chunk_len) + chunk_len = count; + skb_put_data(nu->rx_skb, data, chunk_len); + data += chunk_len; + count -= chunk_len; + - /* Chcek if packet is fully received */ ++ /* Check if packet is fully received */ + if (nu->rx_packet_len == nu->rx_skb->len) { + /* Pass RX packet to driver */ + if (nu->ops.recv(nu, nu->rx_skb) != 0) + nfc_err(nu->tty->dev, "corrupted RX packet\n"); + /* Next packet will be a new one */ + nu->rx_skb = NULL; + } + } + + return 0; +} + /* nci_uart_tty_receive() * * Called by tty low level driver when receive data is