From: Guenter Roeck <linux@roeck-us.net>
Date: Thu, 12 Dec 2019 17:14:34 +0000 (-0800)
Subject: hwmon: (pmbus) Detect if chip is write protected
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9e347728c4fe0f0661194243384ac9f61d7a5c73;p=linux.git

hwmon: (pmbus) Detect if chip is write protected

If a chip is write protected, we can not change any limits, and we can
not clear status flags. This may be the reason why clearing status flags
is reported to not work for some chips. Detect the condition in the pmbus
core. If the chip is write protected, set limit attributes as read-only,
and set the flag indicating that the status flag should be ignored.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
index d198af3a92b6f..90d6c9e23d5fc 100644
--- a/drivers/hwmon/pmbus/pmbus.h
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -22,6 +22,8 @@ enum pmbus_regs {
 	PMBUS_CLEAR_FAULTS		= 0x03,
 	PMBUS_PHASE			= 0x04,
 
+	PMBUS_WRITE_PROTECT		= 0x10,
+
 	PMBUS_CAPABILITY		= 0x19,
 	PMBUS_QUERY			= 0x1A,
 
@@ -225,6 +227,15 @@ enum pmbus_regs {
  */
 #define PB_OPERATION_CONTROL_ON		BIT(7)
 
+/*
+ * WRITE_PROTECT
+ */
+#define PB_WP_ALL	BIT(7)	/* all but WRITE_PROTECT */
+#define PB_WP_OP	BIT(6)	/* all but WP, OPERATION, PAGE */
+#define PB_WP_VOUT	BIT(5)	/* all but WP, OPERATION, PAGE, VOUT, ON_OFF */
+
+#define PB_WP_ANY	(PB_WP_ALL | PB_WP_OP | PB_WP_VOUT)
+
 /*
  * CAPABILITY
  */
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 8470097907bc2..2c196eddbb8d8 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -1088,6 +1088,9 @@ static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
 		snprintf(sensor->name, sizeof(sensor->name), "%s%d",
 			 name, seq);
 
+	if (data->flags & PMBUS_WRITE_PROTECTED)
+		readonly = true;
+
 	sensor->page = page;
 	sensor->reg = reg;
 	sensor->class = class;
@@ -2141,6 +2144,15 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
 	if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK))
 		client->flags |= I2C_CLIENT_PEC;
 
+	/*
+	 * Check if the chip is write protected. If it is, we can not clear
+	 * faults, and we should not try it. Also, in that case, writes into
+	 * limit registers need to be disabled.
+	 */
+	ret = i2c_smbus_read_byte_data(client, PMBUS_WRITE_PROTECT);
+	if (ret > 0 && (ret & PB_WP_ANY))
+		data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;
+
 	if (data->info->pages)
 		pmbus_clear_faults(client);
 	else
diff --git a/include/linux/pmbus.h b/include/linux/pmbus.h
index 08468fca5ea2e..1ea5bae708a15 100644
--- a/include/linux/pmbus.h
+++ b/include/linux/pmbus.h
@@ -8,6 +8,8 @@
 #ifndef _PMBUS_H_
 #define _PMBUS_H_
 
+#include <linux/bits.h>
+
 /* flags */
 
 /*
@@ -23,7 +25,14 @@
  * communication errors for no explicable reason. For such chips, checking
  * the status register must be disabled.
  */
-#define PMBUS_SKIP_STATUS_CHECK	(1 << 0)
+#define PMBUS_SKIP_STATUS_CHECK	BIT(0)
+
+/*
+ * PMBUS_WRITE_PROTECTED
+ * Set if the chip is write protected and write protection is not determined
+ * by the standard WRITE_PROTECT command.
+ */
+#define PMBUS_WRITE_PROTECTED	BIT(1)
 
 struct pmbus_platform_data {
 	u32 flags;		/* Device specific flags */