From: Luca Ceresoli Date: Wed, 29 Jan 2020 15:19:39 +0000 (+0100) Subject: docs: i2c: smbus-protocol: use proper names for ACK and NACK X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9e89d61878f2969bfe018881566bc78871a00fa1;p=linux.git docs: i2c: smbus-protocol: use proper names for ACK and NACK Use the proper ACK and NACK naming from the I2C specification instead of "accept" and "reverse accept". Signed-off-by: Luca Ceresoli Reviewed-by: Jean Delvare Signed-off-by: Wolfram Sang --- diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst index fbadd4d25ad5d..10c4a989982cb 100644 --- a/Documentation/i2c/smbus-protocol.rst +++ b/Documentation/i2c/smbus-protocol.rst @@ -38,7 +38,7 @@ Key to symbols S Start condition P Stop condition Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0. -A, NA (1 bit) Accept and reverse accept bit. +A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to get a 10 bit I2C address. Comm (8 bits) Command byte, a data byte which often selects a register on