From: Russell King Date: Fri, 17 Sep 2021 13:41:17 +0000 (+0100) Subject: net: dpaa2-mac: add support for more ethtool 10G link modes X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9eb7b5e7cb50942f55c1346b0f8d940c07201202;p=linux.git net: dpaa2-mac: add support for more ethtool 10G link modes Phylink documentation says: Note that the PHY may be able to transform from one connection technology to another, so, eg, don't clear 1000BaseX just because the MAC is unable to BaseX mode. This is more about clearing unsupported speeds and duplex settings. The port modes should not be cleared; phylink_set_port_modes() will help with this. So add the missing 10G modes. Signed-off-by: Russell King Acked-by: Marek Behún Acked-by: Ioana Ciornei Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c index ae6d382d87352..543c1f2024209 100644 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c @@ -140,6 +140,11 @@ static void dpaa2_mac_validate(struct phylink_config *config, case PHY_INTERFACE_MODE_10GBASER: case PHY_INTERFACE_MODE_USXGMII: phylink_set(mask, 10000baseT_Full); + phylink_set(mask, 10000baseCR_Full); + phylink_set(mask, 10000baseSR_Full); + phylink_set(mask, 10000baseLR_Full); + phylink_set(mask, 10000baseLRM_Full); + phylink_set(mask, 10000baseER_Full); if (state->interface == PHY_INTERFACE_MODE_10GBASER) break; phylink_set(mask, 5000baseT_Full);