From: Tamizh Chelvam Date: Mon, 27 Jan 2020 19:18:56 +0000 (+0530) Subject: ath10k: Add support to read btcoex related data from DT X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=9f83993e1a92ba19fcee635e4aff823a72a18d0c;p=linux.git ath10k: Add support to read btcoex related data from DT BTCOEX feature is not supported by all QCA4019 chipsets. Since btcoex enabled by default in firmware, host needs to enable COEX support depends on the hardware. Enabling it by default in unsupported hardware will cause some feature disabled in hardware. This patch will read btcoex_support flag and wlan priority gpio pin number from DT. Depends on the btcoex_support flag value host will expose BTCOEX support and wlan priority gpio pin number to target. Testing: * Tested HW : QCA4019 * Tested FW : 10.4-3.2.1.1-00017 Signed-off-by: Tamizh Chelvam Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 5ec16ce19b695..5712e283e2d76 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -2119,6 +2119,40 @@ done: return 0; } +static void ath10k_core_fetch_btcoex_dt(struct ath10k *ar) +{ + struct device_node *node; + u8 coex_support = 0; + int ret; + + node = ar->dev->of_node; + if (!node) + goto out; + + ret = of_property_read_u8(node, "qcom,coexist-support", &coex_support); + if (ret) { + ar->coex_support = true; + goto out; + } + + if (coex_support) { + ar->coex_support = true; + } else { + ar->coex_support = false; + ar->coex_gpio_pin = -1; + goto out; + } + + ret = of_property_read_u32(node, "qcom,coexist-gpio-pin", + &ar->coex_gpio_pin); + if (ret) + ar->coex_gpio_pin = -1; + +out: + ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot coex_support %d coex_gpio_pin %d\n", + ar->coex_support, ar->coex_gpio_pin); +} + static int ath10k_init_uart(struct ath10k *ar) { int ret; @@ -2696,14 +2730,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode, if (test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map)) val |= WMI_10_4_BSS_CHANNEL_INFO_64; + ath10k_core_fetch_btcoex_dt(ar); + /* 10.4 firmware supports BT-Coex without reloading firmware * via pdev param. To support Bluetooth coexistence pdev param, * WMI_COEX_GPIO_SUPPORT of extended resource config should be * enabled always. + * + * We can still enable BTCOEX if firmware has the support + * eventhough btceox_support value is + * ATH10K_DT_BTCOEX_NOT_FOUND */ + if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, - ar->running_fw->fw_file.fw_features)) + ar->running_fw->fw_file.fw_features) && + ar->coex_support) val |= WMI_10_4_COEX_GPIO_SUPPORT; if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 5101bf2b5b158..edf314e3e19e3 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -1222,6 +1222,9 @@ struct ath10k { struct ath10k_bus_params bus_param; struct completion peer_delete_done; + bool coex_support; + int coex_gpio_pin; + /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); }; diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index e000677ac516b..3894b77db71da 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -1978,6 +1978,9 @@ static ssize_t ath10k_write_btcoex(struct file *file, if (strtobool(buf, &val) != 0) return -EINVAL; + if (!ar->coex_support) + return -EOPNOTSUPP; + mutex_lock(&ar->conf_mutex); if (ar->state != ATH10K_STATE_ON && diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 7fee35ff966b6..ac3ad5c5acfc9 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -4982,7 +4982,8 @@ static int ath10k_start(struct ieee80211_hw *hw) param = ar->wmi.pdev_param->enable_btcoex; if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, - ar->running_fw->fw_file.fw_features)) { + ar->running_fw->fw_file.fw_features) && + ar->coex_support) { ret = ath10k_wmi_pdev_set_param(ar, param, 0); if (ret) { ath10k_warn(ar, diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 61885d4d662c7..e76e3654126a4 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -8787,7 +8787,7 @@ ath10k_wmi_10_4_ext_resource_config(struct ath10k *ar, cmd = (struct wmi_ext_resource_config_10_4_cmd *)skb->data; cmd->host_platform_config = __cpu_to_le32(type); cmd->fw_feature_bitmap = __cpu_to_le32(fw_feature_bitmap); - cmd->wlan_gpio_priority = __cpu_to_le32(-1); + cmd->wlan_gpio_priority = __cpu_to_le32(ar->coex_gpio_pin); cmd->coex_version = __cpu_to_le32(WMI_NO_COEX_VERSION_SUPPORT); cmd->coex_gpio_pin1 = __cpu_to_le32(-1); cmd->coex_gpio_pin2 = __cpu_to_le32(-1);