From: Stefan Riedmueller Date: Fri, 3 Apr 2020 13:07:28 +0000 (+0200) Subject: watchdog: da9062: No need to ping manually before setting timeout X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a0948ddba65f4f6d3cfb5e2b84685485d0452966;p=linux.git watchdog: da9062: No need to ping manually before setting timeout There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by: Stefan Riedmueller Reviewed-by: Guenter Roeck Reviewed-by: Adam Thomson Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.de Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- diff --git a/drivers/watchdog/da9062_wdt.c b/drivers/watchdog/da9062_wdt.c index 10b37dd65bed3..706fb09c2f241 100644 --- a/drivers/watchdog/da9062_wdt.c +++ b/drivers/watchdog/da9062_wdt.c @@ -67,11 +67,6 @@ static int da9062_wdt_update_timeout_register(struct da9062_watchdog *wdt, unsigned int regval) { struct da9062 *chip = wdt->hw; - int ret; - - ret = da9062_reset_watchdog_timer(wdt); - if (ret) - return ret; regmap_update_bits(chip->regmap, DA9062AA_CONTROL_D,