From: Horatiu Vultur <horatiu.vultur@microchip.com>
Date: Thu, 15 Sep 2022 06:41:12 +0000 (+0200)
Subject: ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a16b72612bb98a3ef6546bf52569643ddba0104f;p=linux.git

ARM: dts: lan966x: Add interrupt support for PHYs on pcb8290

Add interrupt support for the PHYs found on pcb8290. They are all
sharing the same interrupt line towards lan966x.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220915064112.1935051-1-horatiu.vultur@microchip.com
---

diff --git a/arch/arm/boot/dts/lan966x-pcb8290.dts b/arch/arm/boot/dts/lan966x-pcb8290.dts
index 77187f59f04df..8804e8ba53705 100644
--- a/arch/arm/boot/dts/lan966x-pcb8290.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8290.dts
@@ -58,41 +58,57 @@
 
 	ext_phy0: ethernet-phy@7 {
 		reg = <7>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy1: ethernet-phy@8 {
 		reg = <8>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy2: ethernet-phy@9 {
 		reg = <9>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy3: ethernet-phy@10 {
 		reg = <10>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy4: ethernet-phy@15 {
 		reg = <15>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy5: ethernet-phy@16 {
 		reg = <16>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy6: ethernet-phy@17 {
 		reg = <17>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 
 	ext_phy7: ethernet-phy@18 {
 		reg = <18>;
+		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio>;
 		coma-mode-gpios = <&gpio 60 GPIO_OPEN_DRAIN>;
 	};
 };