From: Guodong Liu Date: Fri, 24 Jun 2022 13:36:56 +0000 (+0800) Subject: pinctrl: mediatek: add generic driving setup property on mt8192 X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a36474f59ace0122fa739df99408dcb77c50d6ed;p=linux.git pinctrl: mediatek: add generic driving setup property on mt8192 1. The dt-binding expects that drive-strength arguments be passed in mA, but the driver was expecting raw values. And that this commit changes the driver so that it is aligned with the binding. 2. This commit provides generic driving setup, which support 2/4/6/8/10/12/14/16mA driving, original driver just set raw data setup setting when use drive-strength property. Signed-off-by: Guodong Liu Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Link: https://lore.kernel.org/r/20220624133700.15487-2-guodong.liu@mediatek.com Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c index acccde9262bae..2421a12fc5738 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c @@ -1372,8 +1372,8 @@ static const struct mtk_pin_soc mt8192_data = { .gpio_m = 0, .bias_set_combo = mtk_pinconf_bias_set_combo, .bias_get_combo = mtk_pinconf_bias_get_combo, - .drive_set = mtk_pinconf_drive_set_raw, - .drive_get = mtk_pinconf_drive_get_raw, + .drive_set = mtk_pinconf_drive_set_rev1, + .drive_get = mtk_pinconf_drive_get_rev1, .adv_pull_get = mtk_pinconf_adv_pull_get, .adv_pull_set = mtk_pinconf_adv_pull_set, .adv_drive_get = mtk_pinconf_adv_drive_get,