From: Chen-Yu Tsai <wens@csie.org>
Date: Wed, 9 Jan 2019 15:02:54 +0000 (+0800)
Subject: ARM: dts: sun8i: r40: Add pinmux setting for CLK_OUT_A
X-Git-Url: http://git.maquefel.me/?a=commitdiff_plain;h=a5a4bc14914faf219336d71c71595975b8112ff7;p=linux.git

ARM: dts: sun8i: r40: Add pinmux setting for CLK_OUT_A

CLK_OUT_A, an external clock output function driven from the clock
control unit, on the R40 is sometimes used to provide a low rate low
power clock to a WiFi or Bluetooth controller.

This patch adds a pinmux setting for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
---

diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index f1fcfa0bdce0c..06b685869f52d 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -342,6 +342,11 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
+			clk_out_a_pin: clk-out-a-pin {
+				pins = "PI12";
+				function = "clk_out_a";
+			};
+
 			gmac_rgmii_pins: gmac-rgmii-pins {
 				pins = "PA0", "PA1", "PA2", "PA3",
 				       "PA4", "PA5", "PA6", "PA7",